Laboratory plastic
Material: LDPE
Material: LDPE
Material: LDPE
Material: LDPE
Material: LDPE
d=17mm, h=120mm
Polystyrene. Wall-mounted, 72 drying places (each rod 100 mm long and 15 mm in diameter), gutter at the bottom. Dimensions 630x450mm.
Material: PE
Material plastic PE
Material: PE
h=290mm, d=40mm.
h=350mm, d=55mm
Engineered from high-purity polytetrafluoroethylene (PTFE), these tweezers are designed for handling aggressive chemical compounds and sensitive samples in laboratory and industrial environments.
- Universal chemical inertness
- Wide thermal operating range
- Low surface energy
- Biological safety
Designed for precise gripping and sampling in environments where conventional polymers and metals are not chemically or thermally resistant.
For powders, liquids, etc. h=115mm, d=30mm
PTFE Laboratory Spoon
Engineered from high-purity polytetrafluoroethylene (PTFE), this spoon is designed for handling aggressive chemical compounds and sensitive samples in laboratory and industrial environments.
- Universal chemical inertness
- Wide thermal operating range
- Low surface energy
- Biological safety
Designed for precise dosing and sampling in environments where conventional polymers and metals are not chemically or thermally resistant.
Cube-shaped stand for test tubes. Holes of different diameters on different sides:
4 places d=28mm
10 places d=17mm
12 places d=12mm
16 places d=11mm
Several test tube stands can be connected together to form a long test tube stand
Hole diameter 18mm
Rod length 43 mm, suitable for test tubes with an outer diameter of 14mm to 16mm.
Dimensions 170x90x60mm
Plastic. Openings 20mm. Dimensions 245x105x70mm.
Plastic. Openings 24mm. Dimensions 245x105x70mm.
Safe polystyrene test tubes h=100 mm, inner=14mm, outer=16mm.
High Impact Polystyrene
High Impact Polystyrene
High Impact Polystyrene
Polypropylene, can be disassembled, with non-return valve, for working with low vacuum.
Suction capacity at water pressure 3.5 bar: 220 liters / h
Final pressure at water temperature 12 ° C: 16 mbar
Water consumption: 220 liters / h
Water connection: via hose nozzle 10 to 12 mm Ø or with threaded union nut R 1/2 "and R 3/4"
Length: 85mm
Material: polystyrene (PS)
Width: 85mm
Height: 24mm
Polystyrene. Wall-mounted, 72 drying places (each rod 100 mm long and 15 mm in diameter), gutter at the bottom. Dimensions 630x450mm.
Engineered from high-purity polytetrafluoroethylene (PTFE), these tweezers are designed for handling aggressive chemical compounds and sensitive samples in laboratory and industrial environments.
- Universal chemical inertness
- Wide thermal operating range
- Low surface energy
- Biological safety
Designed for precise gripping and sampling in environments where conventional polymers and metals are not chemically or thermally resistant.
PTFE Laboratory Spoon
Engineered from high-purity polytetrafluoroethylene (PTFE), this spoon is designed for handling aggressive chemical compounds and sensitive samples in laboratory and industrial environments.
- Universal chemical inertness
- Wide thermal operating range
- Low surface energy
- Biological safety
Designed for precise dosing and sampling in environments where conventional polymers and metals are not chemically or thermally resistant.
Cube-shaped stand for test tubes. Holes of different diameters on different sides:
4 places d=28mm
10 places d=17mm
12 places d=12mm
16 places d=11mm
Several test tube stands can be connected together to form a long test tube stand
Rod length 43 mm, suitable for test tubes with an outer diameter of 14mm to 16mm.
Dimensions 170x90x60mm
Safe polystyrene test tubes h=100 mm, inner=14mm, outer=16mm.
Polypropylene, can be disassembled, with non-return valve, for working with low vacuum.
Suction capacity at water pressure 3.5 bar: 220 liters / h
Final pressure at water temperature 12 ° C: 16 mbar
Water consumption: 220 liters / h
Water connection: via hose nozzle 10 to 12 mm Ø or with threaded union nut R 1/2 "and R 3/4"